Lead and zinc work in Leiden
Lead and zinc work in Leiden, carried out by the roofer himself. Leaks often start precisely at the connections around chimneys, dormers, and valley gutters, so that is where I pay the most attention. Neatly soldered leadwork, smart zinc gutters, and a finish that lasts for years. VCA certified, with a 10-year written guarantee, in Leiden and the surrounding area.
Lead and zinc work in Leiden by the roofer himself. Neat work on chimneys, dormers, and gutters, where leaks start. VCA certified, 10-year written warranty.
- Soldering and tilting work by Yuri himself
- Response within 2 hours by phone
- 10-year written warranty on every job
VCA
Certified
10
Year warranty
2
Hour response
How I approach your lead or zinc work
01
Personal inspection
I personally inspect your leadwork, chimney, and zinc gutters and provide honest advice regarding repair or replacement. Timely inspection often prevents leaks and moisture damage to beams and ceilings.
02
Clear quotation
Based on the inspection, you will receive a quotation including your choice of lead, zinc, or copper, as well as a transparent breakdown of workmanship hours and installation. No surprises afterwards.
03
Craftsmanship with soldering and tilting
I solder the seams myself, cut zinc bends to size, and install the work tightly and leak-free. Upon completion, you will receive photos of the result as well as the written 10-year warranty.
Craftsmanship in lead and zinc work: soldering, tilting, assembly
Lead and zinc work is a craft that I handle entirely myself. I solder the joints using a tin-lead alloy, because glued connections on a roof come loose after a few years due to temperature fluctuations and UV light. I bend zinc corners and gutters on-site using specialized tools, ensuring that every bend fits your roof dimensions precisely.
When working with lead around chimneys and dormers, I always check the condition of the substrate, because a nice sheet of lead on rotten wood is a waste of effort. If the roof boarding or fascia needs replacing, I do that first before installing the lead. This way, I guarantee that your chimney connection will not leak again in three years.
I supply copper work upon request, especially for monumental buildings or where you desire a very long lifespan, but zinc is the best choice for most homes: affordable, durable, and with good workmanship, it will last 25 to 30 years without any problems. I will give you honest advice about what your roof needs.
Why you can come to me for lead and zinc work
Owner on your roof
I don't send a helper with a soldering iron; I stand next to your chimney myself and solder the seams. You know who you are dealing with, from quotation to completion.
10-year written warranty
You receive a written guarantee on lead and zinc work. If a leak occurs due to my work, I will resolve it for you without discussion.
Lead, zinc, and gutters
Whereas with other providers you have to hire a separate plumber for the chimney and a roofer for the tiles, with me you get everything from a single source, including zinc gutters.
Response within 2 hours
If you call about water damage caused by lead flashing blown loose around the chimney, you won't be on the phone for the rest of the day. I will contact you by phone within 2 hours to schedule an appointment.
Lead flashing around your chimney
Lead flashing around a chimney has a lifespan of approximately 30 to 50 years, but this depends heavily on the quality of the original work and the substrate. Signs that replacement is necessary include: lead coming loose from the masonry, cracks caused by temperature differences between a warm chimney and a cold roof, or green discoloration indicating acidification.
I always replace lead flashing in combination with an inspection of the mortar joints and the chimney breast, because a leaking chimney can also be caused by damaged masonry. After installing the new lead, I seal the top against the masonry with sealant and solder the underside watertight under the roof tiles.
Zinc connection for your dormer
The junction between a dormer and the tiled roof is a common leak site, as rainwater flows down there and, in the case of poor workmanship, creeps under the roof tiles. I install zinc flashing on the sides and underside of the dormer, with soldered seams that are leak-proof and last for decades.
With older dormers, I often see that the zinc work is secured with nails that loosen due to rust, causing the entire strip to flap in the wind. I work with clamp fixings and soldered joints so that the zinc stays in place and the wood underneath remains dry.
What you can expect regarding the costs of lead and zinc work
While some companies present quotes stretching for kilometers, featuring four different lead types, three zinc thicknesses, and ten options for fastening methods, I offer you one expert recommendation based on what I have seen working for six years: professionally soldered zinc work or lead in the right thickness for your situation. No decision stress, just honest advice.
I have been working with lead and zinc for six years and provide you with a realistic quote in advance that suits your situation. You will receive the quote in writing before I start, and after your approval, I will carry out the work as agreed. I always discuss any additional work with you first, so that you have clarity beforehand and are not faced with surprises afterwards.
Frequently asked questions about lead and zinc work
A plumber works on pipes and installations inside the house, while a roofer performs the lead and zinc work on the roof itself. Lead around chimneys, dormers, and zinc gutters are part of a roofer's work, as they are part of the roof structure and waterproofing. I am a roofer and include lead and zinc work as a full-fledged sub-service in my portfolio.
If you see cracks, the lead coming loose from the masonry, or if there is green efflorescence, replacement is advisable. Do not wait until the leak is already visible in the attic, as by then there is often moisture damage to the woodwork as well. I will come by for a free inspection and give you honest advice, but I will leave one thing open for now: many people only call when the water is already inside, whereas a timely inspection prevents hundreds of euros in moisture damage.
Well-soldered and mounted zinc work lasts 25 to 30 years, sometimes longer. The lifespan depends on the quality of the soldering, the thickness of the zinc, and exposure to the elements. I use standard zinc sheet of sufficient thickness and solder all seams with craftsmanship.
I custom-fit zinc gutters on-site so that every corner and curve fits your roof perfectly. Prefabricated gutters come in standard sizes and often require extra connectors that can leak. Custom work is more expensive in terms of labor hours, but it saves you a lot of trouble later on.
Soldering with a tin-lead alloy is still the best method for lead and zinc work on a roof. Glued joints come loose after a few years due to temperature fluctuations and UV light, and snap-fit connections are not watertight enough. So I solder everything myself by hand, as it should be done.
Field of work: lead and zinc work
I provide lead and zinc work in Leiden, Leiderdorp, Oegstgeest, Voorschoten, Katwijk, Noordwijk, Wassenaar, and all places within 20 kilometers of Leiden. In emergencies, I can often schedule work for the same day.
What clients say about my work
All-round company Le Noble is a young company, founded in 2025. My first clients in Leiden and the surrounding area share their experiences on my Google Business Page. Would you like to hear what they thought of my work? View the current reviews on Google.
ReviewsI had a leak after a heavy rain shower and wanted it resolved quickly. Allround Bedrijf Le Noble responded promptly, clearly explained what was wrong, and carried out the repair neatly. Everything was left clean, and the roof is completely back in order.
Communicative, punctual, high-quality work! We needed an emergency roof repair (shifted tiles). Called, and he helped and fixed it the same day. Fantastic work done. We would call him again in a heartbeat!
Ready for professional lead or zinc work with a 10-year written warranty?
I do the soldering and bending myself, inspect the surface beforehand, and deliver work that will last for decades. You will receive a written 10-year warranty on paper and a clear quotation in advance, so you know exactly what you are getting and what it costs. After delivery, I take photos of the result so you can see that everything is finished professionally and that you can go home satisfied. That final delivery, with photos and warranty paper in hand, is the moment I get the most satisfaction from, and one where you can move forward with peace of mind.
