Replacing flat roofs Leiden

Flat roofs in Leiden, from a new extension to a dormer or garage. I install bitumen or EPDM with attention to the slope, seams, and details around the edges, as this is where things usually go wrong with a flat roof. A single point of contact, VCA-certified work, and a 10-year written warranty in Leiden and the surrounding area.

Flat roofs in Leiden in bitumen or EPDM, from extensions to garages. Proper slope and sealed seams, where a flat roof usually goes wrong. VCA certified, 10-year written warranty.

VCA

Certified

10

Year warranty

2

Hour response

Are you unsure whether to choose repair or complete replacement?

I will come by within a few days for a no-obligation inspection and a clear written quote.

How I handle your flat roof

01

Personal inspection

I climb onto the roof myself and inspect the slope, seams, penetrations, and the condition of the roof decking. This allows me to see what is happening beneath the roofing and prevent surprises during the execution phase. This approach guarantees a professional completion.

02

Clear quotation

You will receive a written quotation with a clear choice between bitumen layers, insulation options, and optional fascia boards. I will explain what suits your situation, without any sales talk. This way, you know exactly where you stand beforehand.

03

Professional execution and delivery

I carry out the work myself in accordance with VCA standards, take photos during the handover, and provide a written 10-year warranty. The roof was left tidy, exactly as I would want to see it myself.

Allround Le Noble - About us

Why bitumen specialist Le Noble

Bitumen is my specialty. I have been working with this material for six years, from heat-welding the seams to reinforcing corners and eaves. What sets me apart is that I personally inspect every flat roof before submitting a quote. Only from the roof can I see if the slope is correct, if there is moisture damage in the roof decking, and if the insulation is still adequate. I incorporate this knowledge into my advice, so that you know exactly what to expect beforehand.

For EPDM or PVC, I will honestly refer you to a fellow professional, as bitumen is something I expertly supply myself. No subcontractors, no middlemen, just Yuri doing the work and putting the warranty in writing. That direct communication means you make your arrangements with the same person who delivers the roof.

Why replace a flat roof on time

Prevent moisture damage

A leaking flat roof causes moisture damage to ceilings, insulation, and even the interior. Timely replacement saves you expensive interior repair costs. Professional execution prevents leakage at penetrations and seams.

Energy saving insulation

When replacing, you can immediately upgrade the insulation layer to modern PIR or PUR boards. This immediately lowers your heating costs and increases living comfort. Expert insulation construction makes all the difference.

Longer lifespan

Professionally installed bitumen roofing lasts 15 to 25 years. Sloppy seams or incorrect slope drastically shorten that lifespan. Careful installation guarantees years of enjoyment.

Written guarantee

With a 10-year written warranty, you can be certain that the work has been executed properly. Any leaks within that period will be repaired free of charge, thanks to my craftsmanship.

Bitumen roofing, my craftsmanship

Bitumen is my specialty, and I learned the trade in practice six years ago. It is a roofing material consisting of multiple layers that is applied using heat. I work standardly with a 2-layer system: an underlayer that I fully adhere to the roof decking, and a top layer that I heat and torch-on. This top layer has coarse granules that block UV radiation and protect the roofing against the elements.

The craftsmanship lies in the details. Seams must overlap by at least 8 centimeters and be completely sealed by heat burning; otherwise, water will seep in. I reinforce corners with a triangular batten to prevent the bitumen from cracking due to temperature fluctuations. Around penetrations such as ventilation pipes and chimneys, I apply a clamping strip that seals watertight against the roofing. These are the places where things often go wrong due to sloppy workmanship.

What I consider important is the substrate. Before I start, I inspect the roof decking for rot and moisture damage. If the wood is in poor condition, I replace it first. Otherwise, the bitumen seals nicely, but the roof will still sag later. The same applies to insulation: if it is wet or no longer meets the requirements, I address that in one go. This prevents you from having to invest again in a few years.

For the edge finishing, I use zinc or aluminium gutters, which I expertly connect to the bitumen. I also supply fascia boards around the flat roof; this keeps everything neat and protects the woodwork against moisture. If you wish, I can provide the link to my page about fascia board.

Bitumen is suitable for virtually any flat roof, from shed roofs to extensions and garages. It is a reliable material with a good price-performance ratio. For situations where a longer lifespan is desired, such as roofs with solar panels or complex shapes, EPDM may be a better choice. In that case, I will give you honest advice and refer you to an EPDM specialist, because I only supply what I can do well myself.

EPDM roofing, information and honest advice

EPDM is a rubber membrane that is applied in a single layer and has a longer lifespan than bitumen. I do not install EPDM myself, as that requires a different technique and craftsmanship than what I work with. Nevertheless, it is important that you understand the choice so that you can make an informed decision.

EPDM consists of synthetic rubber and is cut to size for your roof. The seams are joined together with glue or tape, which requires skilled craftsmanship to ensure a watertight seal. The lifespan ranges from 30 to 50 years, depending on the quality and installation. The material is virtually maintenance-free and remains flexible during temperature fluctuations.

EPDM is particularly suitable for roofs with solar panels because it is heat-resistant and does not release granules. EPDM can also offer advantages for complex roof shapes with many angles, as it can be processed in large sections. It is more expensive than bitumen, but that investment pays for itself through a longer lifespan.

Since I do not supply EPDM myself, if you require EPDM, I will refer you to a fellow professional who is proficient in that material. That is honest advice, because I only supply what I can personally guarantee with expertise.

PVC roofing, when is this an option

PVC foil is a plastic roofing material that is welded with hot air. It is used for specific applications, such as roofs where UV resistance is important or where solar panels are installed. PVC has a lifespan of 20 to 30 years and is lighter than bitumen.

The seams are welded with a hot air machine, which is comparable to burning bitumen but requires a different technique. PVC is more expensive than bitumen but cheaper than EPDM. The material is less flexible in the cold, which can sometimes be a disadvantage in Dutch winters.

I do not work with PVC myself, as bitumen is my specialty and I only supply what I fully master. Should PVC be the best choice for your situation, I will honestly inform you of this and refer you elsewhere.

Le noble - Flat roofs in Leiden

Which material suits your flat roof

Many people hesitate between bitumen, EPDM, and PVC. Each material has advantages and disadvantages, depending on your situation. Below is an honest comparison so that you do not get lost in the choice overload.

Lifespan

Maintenance

Suitable for

For most flat roofs in Leiden, bitumen is the best choice in terms of price-performance. The material is reliable, easy to repair, and professionally installed. For situations where a longer lifespan or specific properties are desired, EPDM may be a better fit. In that case, I will refer you to an EPDM specialist, as I only supply bitumen and I do it well. You do not have to choose from endless options; I advise on what suits your situation.

Complete renovation of your flat roof

A flat roof renovation is more than just installing new roofing. It starts with removing the old bitumen, which can be done in two ways: heat burning or mechanical pulling. Heat burning is faster but requires expertise to prevent fire hazards. Pulling is safer but labor-intensive. I choose the method based on the situation and the substrate.

After removal, I thoroughly inspect the roof decking. I immediately replace rotten wood or moisture damage, because new roofing on poor wood is a waste of money. I often see that the roof decking is damaged around the edges or at penetrations. I saw out those areas and replace them with new plywood or OSB board, depending on what fits best.

Next comes the insulation layer. Many older flat roofs have insufficient or outdated insulation. I work with PIR or PUR boards, which have a high Rd value and are thin, so that the roof height remains limited. I install this insulation flat and airtight to prevent thermal bridges from forming. If you would like to have roof insulation installed separately or would like to know more about it, I refer you to my page about roof insulation.

I apply the new bitumen roofing in two layers, as I described earlier. I carefully heat-seal the seams, reinforce the corners, and seal penetrations watertight with clamping bands. I check the slope beforehand, because standing water on a flat roof drastically shortens its lifespan. If the slope is incorrect, I adjust it using an insulation wedge or a new roof shape.

Around the flat roof, I neatly finish the edges with fascia boards in Trespa, Plastisol, or Keralit. This protects the woodwork against moisture and provides a sleek finish. For more information, I refer you to my page about fascia board. I connect the rainwater drainage to new or existing gutters, depending on their condition. If the gutters are outdated, I replace them at the same time. You can find more about this on my page about gutters.

The result is a completely renovated flat roof that will last for decades. You receive a 10-year written warranty on all work, from the woodwork to the bitumen finish. I always show photos of the completion so you can see that everything has been left neat and tidy. This careful finishing will stay with you long after the job is finished.

For a complete process that also includes other parts of your roof, such as tiled roofs or insulation of the entire roof, I refer you to my page about roof renovation.

What determines the price of your flat roof

A flat roof is not a standard product. Many people are surprised by the price difference between quotes, but that is because every roof is unique. The dimensions, the condition of the existing structure, the insulation requirements, and accessibility all combine to determine the cost. A simple bitumen replacement for a shed roof costs much less than a complete renovation of an extension with insulation and fascia boards.

The risk of “cheap” quotes is that you will be faced with additional costs afterwards. A roofer who does not climb onto the roof first will not see hidden damage to the roof decking or insulation. If those problems surface during the work, the price will increase after all. That is why I work with a no-obligation quote for each project, which I draw up after a personal on-site measurement. During that inspection, I see what lies beneath the old roofing and whether there are any hidden defects. This way, you gain clarity on the total investment beforehand, without unexpected additional costs afterwards.

I have been working with bitumen for six years and know the materials and prices inside out. My quote is clear and in writing, so you can compare and decide at your leisure. No sales talk, just an honest story about what your flat roof needs. One phone call to 06 45339250 and I will come by for a free inspection.

Frequently asked questions about flat roofs

Bitumen is a multi-layer system applied with heat and lasts 15-25 years. EPDM is a single-layer rubber membrane with a lifespan of 30-50 years. Bitumen is cheaper and suitable for most flat roofs; EPDM is more expensive but has a longer lifespan and is suitable for roofs with solar panels.

A professionally installed two-layer bitumen roof covering lasts 15 to 25 years. The lifespan depends on the quality of the workmanship, maintenance, and exposure to the elements. Periodic inspection of the seams extends the lifespan.

Signs include: standing puddles, blisters or cracks in the bitumen, leakage at pipe penetrations or edges, or visible moisture damage to the ceiling below. If you recognize any of these signs, an inspection is advisable.

That depends on your wishes and budget. For most flat roofs, bitumen is the best choice in terms of price-performance. For a longer lifespan or specific requirements such as solar panels, EPDM is better. I will give you honest advice after an inspection.

Check annually whether puddles remain and if the seams are still intact. Remove leaves and debris from the rainwater drain. If in doubt, you can call me for a free inspection.

Upon completion, I take photos of the work and provide a written 10-year warranty. This warranty covers both materials and workmanship. The roof is left tidy, and you receive instructions regarding maintenance. This careful completion ensures that you have a positive impression of the job.

Contact details

Telephone

06 45339250

E-mail

info@allroundlenoble.nl

Address

Mendelweg 32, 2333 CS Leiden

Service area around Leiden

I work in Leiden and all surrounding places within 20 kilometers: Leiderdorp, Oegstgeest, Voorschoten, Katwijk, Noordwijk, Sassenheim, Lisse, Warmond, Zoeterwoude, and Alphen aan den Rijn.

What clients say about my work

All-round company Le Noble is a young company, founded in 2025. My first clients in Leiden and the surrounding area share their experiences on my Google Business Page. Would you like to hear what they thought of my work? View the current reviews on Google.

5.0
Based on 18 reviews
google

Very skilled roofer who communicates calmly and neatly keeps his appointments.

Noah de Jong September 12, 2026
google

Quick response to our urgent request. All-round company Le Noble carried out our roof leak repair immediately and truly saved us from major water damage. Very professional and customer-friendly approach!

Liam van Dijk August 31, 2026
google

I received a clear quote beforehand, with no surprises afterwards. They calmly took the time to answer my questions, and the work was carried out carefully. It is nice to find a company that does what it promises.

Timo Schouten August 27, 2026

10-year written warranty on every bitumen job

You will receive the warranty on paper, with my name and signature. I will repair any leaks within that period free of charge. I will respond by phone within 2 hours. 06 45339250.

Cookies preferences

✕

Others

Other uncategorized cookies are those that are being analyzed and have not been classified into a category as yet.

Necessary

Necessary
Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.

Advertisement

Advertisement cookies are used to provide visitors with relevant ads and marketing campaigns. These cookies track visitors across websites and collect information to provide customized ads.

Analytics

Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.

Functional

Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.

Performance

Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.
WhatsApp WhatsApp